FLAG FRIDAY Gelli® Print Prayer Flags

I'm a mixed media artist but a total newbie when it comes to prayer flags. I've always had a thing for hearts and decided to work with the color black as the top layer instead of the bottom layer.  Wasn't sure if it would work out but it would be fun to try it anyway.

These are the materials that you will need to give this project a try:

Gelli® Printing plate 8x10 (or smaller if you wish)

heavy acrylic paints in favorite colors and black

Natural or white cotton duck cloth

brayer

stencils

scrap paper and/or text paper

paper plate

wet wipes

spray bottle and paper towels

paper plates

Optional:  acrylic inks and bamboo skewers

embellishments

You'll need an area where you can lay out all your materials and have a flat surface for your Gelli Plate. Cut your fabric slightly larger than the size of your Gelli Plate so you can press down on the Gelli Plate and not get paint all over your hands. You can use the excess scraps for other projects.

The first layer of paint will provide contrast with the top layer of black paint, so my first layer will be a solid layer of a bright color acrylic.  I squirted a solid color onto the Gelli plate and brayered it all over the plate.  I placed the cloth on top of the plate and applied pressure evenly with my hand across the fabric and plate.  Then I lifted the fabric off the plate.  I don't need a lot of paint. Just enough to cover the plate in an even coat.  I made several of these first layers.  It is not necessary to let the fabric dry completely before you do the next layer. Clean your Gelli Plate with a wet wipe and/or water and paper towels after each pull or each color.

Below,  you will see the 2nd layer of acrylic paint with black on the Gelli Plate + stencil.  Squirt black paint on the plate and brayer it evenly. Immediate lay the stencil on to the plate and then place the fabric on top of the stencil with paint side down.  Use your hands with firm pressure to press down firmly and evenly to get the print on the fabric.  Some people work from the middle out and some work from the top down.  Some people use a brayer to do this but I get a better feel with my hands. Remove the fabric from the stencil immediately after.  

This last one with the black paper is an example of what you get using red paint with black cardstock.  I didn't bother to clean the Gelli Plate before I printed on it.

Note:  You can set the stencil, paint side down on a piece of scrap fabric/paper and get a partial print if there is enough wet paint left on it.  I don't bother to clean my stencils until I am done with all my prints.  That's why my stencils are so colorful.

If you take a piece of scrap paper or text paper and lay on top of the Gelli Plate that you just used with the stencil and press down firmly and evenly throughout the plate you will get a ghost/residual print that you can use in your artwork.  I use mine mostly for backgrounds and journal pages in my art journals. Lay the stenciled pieces of paper aside to dry.  See my two examples below:

I wanted to have some red heart backgrounds so I could cut out some red hearts and sew them onto my prayer flags.  As a result, I brayered red paint on the Gelli Plate and got a red background on my fabric. The only problem was that it looked too plain.  I figured that I would try it again but would stick a stencil in between the plate and the fabric with another layer of red paint. This is what I got.  I really liked the texture even though I used the same color red again.

These are the stencils I used for this project.  I used stencils from MaryBeth Shaw - Stencil Girl Products and Artistcellar Stencils. You can tell that I use them a lot because they are so colorful. Yes, I do clean them all the time, I just don't get to it right away.

Once my layers of paint are all dry, I want to add a little color, embellishing, and writing to it.  This is when I get out the acrylic inks.  I use a wooden skewer to add a bit of color and contrast.

Once it all dries, I cut them to size.  I know they are 5x8" but have to remember that I have to leave a few inches more at the end to fold over so I can hang it.  So, it's more like 5x11". I marked the back side with a dot where I needed to fold it over to sew it, to make it easier on myself later.  These are what the cut-out unfinished pieces of fabric looked like.

I decided I needed to sew my little hanging end/flap first so I knew where I could position my hearts and other stuff.  Then I stitched on the hearts/flowers/stuff and did my writing. This is my end result:

Well, the prayer flags are not complete until I've gone outside and hung them out on a line.  I couldn't do it myself. My daughter had to volunteer to help me. You'll see her in one of the pictures.

Hope you enjoyed the tutorial and will have some fun using the Gelli Plate making your own prayer flags.  You can find me on Facebook. Let me know if you have any questions. Comments are always welcome. 

                      - Belinda Spiwak

Influential Women in My Family

 When I designed this line of fabric "Heart and Soul Sisters," I was influenced by the amazing women in my family who dreamed big to be a doctor, a writer, a teacher, and a dentist.  They followed their hearts.

So be true to yourself, be bold, be brave and be strong to be the best that you can be.  ~ Jamie Fingal

A pick me up.

Here is a flag sent to us by Vickie

 "I've been praying for someone whose been going through a tough time lately,

 I thought she could use a special little pick-me-up.

 As long as I can remember she's played the piano, sung in church and in can-tata's.

 For many years I stood behind her watching her hands move across the keys of an old upright piano while words of God's love were embedded in my heart from the old time hymns she sang." 

Vickie

http://morestarsincomanche.blogspot.com

Heart

Here is a flag sent  by Beverly Hilbert of Arlington VA.

"I have attached the prayer flag I made on Sunday at Artistic Artifacts. One of the members made the base. The collage was made from the collection of goodies at my table. It was fun to do." 

Comfort, Love and a peaceful Heart

 

Diane Knauff created this flag in response to a review of a book she read. The theme for the flag came from a quote from the book.

… when the world quiets to the sound of your own breathing, we all want the same things: comfort, love, and a peaceful heart.

More details can be found on her blog.

from the Heart

Blog land has been awash with hearts today. Mine included :)
Thinking that it would be nice to have a heart here, I have quickly made this, showing that the flags do not always have to be intricate, beautifully stitched pieces. This was done in well under an hour, using textile pens and some very simple stitching.

It is already dark here in the U.K. so not the best photo, but I would like to wish all our readers and contributors, the Valentine's day they wish for.